Thread: Help needed the Pre-3 CF CSS Config.
View Single Post
  #13  
Old 21st July 2023, 01:54 PM
bob orbell bob orbell is offline
Senior Member
  
Join Date: Nov 2009
Location: kettering northants.
Posts: 2,712
Default Re: Help needed the Pre-3 CF CSS Config.
Just finished mine and the set to CCS, switched on and measured the CCS voltage and adjusted with the trimmers to the recommended 0.84 volts with no problems, I suggest Graham tries again with the correct ECC88 valve, if it still does not come up to the correct voltage then it must be a malfunction. I did offer to have a look at it and the offer still stands. Bob
Reply With Quote