World-Designs-Forum  

Go Back   World-Designs-Forum > FAQ > FAQ - Test and Measurement
Register FAQ Members List Calendar Gallery Today's Posts Mark Forums Read

FAQ - Test and Measurement Checking Audio Components

 
 
Thread Tools Display Modes
  #1  
Old 6th January 2006, 11:01 PM
FAQ Team FAQ Team is offline
FAQ *****istrator
 
Join Date: Jan 2006
Location: faq
Posts: 44
Default How do I measure the power output of my amplifier?

How do I measure the power output of my amplifier?

The simplest set up needs, preferably a dual trace oscilloscope, signal generator and 8ohm load resistor. You can check at all audio frequencies or just a few to give you an idea of whether the amp is likely to be working to spec.

Connect the load resistor to the amplifier across the + and negative speaker terminals, connect one probe of the oscilloscope to the o/p of the signal generator and the other to one of the positive and negative loudspeaker terminals. Feed a sine wave signal into the amp increasing the input level until the first sign of clipping or other distortion can be seen on the scope trace at the loudspeaker terminal. Measure the voltage on the scope trace as a peak to peak measurement. Divide this measurement by 2.82 to convert to RMS volts and use Ohms Law to give watts, EG:

peak to peak volts = 44v, divided by 2.82 gives 15.6v RMS into the 8ohm load


Using I = V/R
I = 15.6v divided by 8ohms = 1.95Amps

then using W = Amps x Volts
15.6V x 1.95A = 30.42Watts


Alternatively, since power = voltage squared divided by R, therefore:

Power = 15.6 x 15.6 / 8 = 30.42 Watts

Last edited by John Caswell; 16th July 2011 at 03:48 PM. Reason: Tidied up text
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie guide to SE Vs PP Dave the bass General 49 11th January 2008 03:45 AM
power supply damping in psu d. Ianm2 Amplifiers 7 9th August 2006 03:35 AM
What is a single-ended amplifier? FAQ Team FAQ - Technology 0 6th January 2006 11:22 PM
A newcomers guide to getting an Amp working - Part 1 FAQ Team FAQ - Starting from Scratch 0 6th January 2006 08:37 PM
A newcomers guide to getting an Amp working - Part 2 FAQ Team FAQ - Starting from Scratch 0 6th January 2006 08:36 PM


All times are GMT +1. The time now is 04:30 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright World Designs