World-Designs-Forum  

Go Back   World-Designs-Forum > DIY Projects > Loudspeakers
Register FAQ Members List Calendar Gallery Today's Posts Mark Forums Read

Loudspeakers Your DIY Speaker designs

Reply
 
Thread Tools Display Modes
  #61  
Old 17th September 2023, 12:03 PM
Roodpa Roodpa is offline
Junior Member
 
Join Date: Sep 2023
Location: United Kingdom
Posts: 1
Smile Re: Tweaking Castle Conway 3 speakers

Quote:
Originally Posted by Richard View Post
I got a pair of these used a few months ago after reading very positive reviews from Noel at HFW and thinking they should work well in our room.

http://www.castle.uk.com/LinkClick.a...language=en-US

I must say I agree completely with the review. A flawed gem of a speaker.

I lived with it and it educated my ears to a different presentation. I still missed a little air and sparkle at the top end though.

First job was to try the spikes. The mounting inserts were loose in the MDF plinths so I'd not used them yet. They wobbled and rotated but wouldn't pull out by hand. To stop the insert pulling the MDF to pieces around the hole I put a large washer on first, with a hole just large enough for the insert, then stacked more washers and used the spike nut and thread to draw the insert out with a spanner. Refitted them with epoxy and they work properly now.

That tightened up and focussed the sound and was well worth the effort but Noel's measurements and my ears said I should look at the crossover.

It came out easily, just up-ended the speaker, undid the 8 screws on the terminal panel, and there it is on the back. Very high quality parts for a commercial design. So are the drivers and cabs too.

Followed the circuit and drew it out below. It's clear to see the 3R3 attenuating resistor for the tweeter on the left in the pic connected directly to one end of the 4.7uF.

Did the maths and figured that for a nominal 8 ohms 3R3 gave -3dB to the tweeter. Changing that to 1R2 would give -1.2dB or using 2R2 would give -2.1dB. So those changes would effectively raise the tweeter level by approx +2dB or +1dB.

That didn't sound much so I plumped for the +2dB raise and fitted 1R2. It was immediately noticable but after a couple of tracks all I could focus on was the new found treble! There were no nasties with it and it didn't seem to be showing up limitations in the tweeter but it was just too detached and unrealistic sounding.

Then went for the 2R2 which should only raise level by 1dB so didn't expect much but it is fantastic! I cannot believe that such a small change has improved the sound to this degree. Still transparent and natural but with the air and presense that was previously lacking. Not just a sound balance thing either as there is now much better soundstaging, presumably as so much directional information comes from the high frequencies.

Anyway I realise there won't be millions of these speakers out there but here are the pics,







Hi Richard,

I bought a pair of Castle Conway 3 speakers earlier this year and, although I love them, I recognised the tweeter problem - sound was there but just no 'fizz' on cymbals or the like. I'm driving them with an Arcam A85 amplifier. Being old with failing hearing doesn't help so I did some research, thinking that maybe it was the tweeter and discovered your attenuator resistor 'mod' (above). I read it carefully, followed you advice to the letter and replaced the 3R3s with 2R2s for about a 1db volume increase and they are now magic! I'm very grateful for the advice!

After doing this, I then replaced the 20 year old QED 79 strand cable I had bi-wiring my earlier speakers (MA Reference Gold 20) which was starting to show a few signs of corrosion. I've never been absolutely convinced that bi-wiring made much difference (but I'd sort of persuaded myself that it did) so I decided to use QED XT40i cable but to revert back to a single run arrangement and use speaker wire bridges instead of the weedy metal bits that came with the speakers. The sound is now excellent. Going back to single run cabling wasn't noticeable at all as the better quality cable more than made up for any difference there may have been.

Anyway, just wanted to say thanks.
Reply With Quote
  #62  
Old 21st September 2023, 07:52 PM
Richard Richard is offline
Super Moderator
 
Join Date: Dec 2005
Location: Notts
Posts: 5,357
Default Re: Tweaking Castle Conway 3 speakers

Hi Roodpa and welcome to the forum! Many thanks for the feedback on the Castles. Lovely speakers and I'm glad the small treble tweak has been the icing on the cake so to speak Many speakers used to have a tweeter level control (and many amps had tone controls) for small adjustments. Room furnishings can make quite a difference, soaking up treble, and some folk listen with the grilles on/off, or sitting on/off axis etc so it can be useful
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:33 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright World Designs