|
Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read |
WD Loudspeakers For discussion of World Designs Loudspeakers |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Air core coil for the wd25tex coil anyone.
Has anyone, by any chance ever tried a 0.76H air core coil for the Seas mid bass driver on their wd25tex speakers instead of the ferrite cored one in the original kit ? How did it go ? If no one has, do any of the more learned here think it might be worth trying ?
Last edited by VantheMan; 19th March 2021 at 01:53 PM. |
#2
|
|||
|
|||
Re: Air core coil for the wd25tex coil anyone.
Hi Van,
Ideally you'd keep inductance and DCR the same so an air cored inductor would have to be bigger than a ferrite cored inductor for the same inductance and resistance. In this case the supplied ferrite coil is only 0.2R DCR and, as long as the core isn't saturating, I wouldn't expect much/any difference in sound going to an air core. I haven't looked but it may be that you might not even be able to get 0.76mH 0.2DCR in an air core but you could perhaps wind your own. |
#3
|
|||
|
|||
Re: Air core coil for the wd25tex coil anyone.
Hi Richard, there are Jansen wax foil coils with exactly the same values as the original ferrites: 0.76H and 0.2 DCR. Not too large for my external xovers. Guess I’m after a bit more snap and thought I might try.
Last edited by VantheMan; 19th March 2021 at 08:04 PM. |
#4
|
|||
|
|||
Re: Air core coil for the wd25tex coil anyone.
Maybe give them a go then Van but check the power rating so they don't overheat and melt the wax in your lovely climate. Perhaps the 13 gauge enamelled wire version would be safer.
|
#5
|
|||
|
|||
Re: Air core coil for the wd25tex coil anyone.
Lovely climate ? 9 months a year maybe. I’ll swap mine for yours June - August anyday.
|
#6
|
|||
|
|||
Re: Air core coil for the wd25tex coil anyone.
Hi Van, we only went once at Christmas - surreal lounging by the pool on Christmas day - and Feb and Oct half terms with the kids when they were young. I take it the summer is a bit warm then!
I had a look at Hifi Collective site and see this waxcoil 0.75mH 0.16DCR, https://www.hificollective.co.uk/con...mm-width-12awg and this air core enamelled wire 0.76mH 0.17DCR, https://www.hificollective.co.uk/cat...wire-coil.html I'm not sure if they'd fit or you had others in mind. There's no real indication about power handling of the coils that I can see. (Probably the power rating isn't the issue with the wire gauge but it seems you'll need to use heavier gauge to keep similar DCR as the wire will be longer for similar inductance.) Last edited by Richard; 22nd March 2021 at 10:46 AM. Reason: (Probably...) |
Thread Tools | |
Display Modes | |
|
|