|
Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read |
WAD Problems For questions and answers re older World Audio Design Projects |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
kt88 power amp repair
Good morning all . having got my amp up and running it is time to get my kat 88 going again i am not at all confident with this amp as it is not tag board is there any one on here who could repair it for me .
Kind Regards Steve. |
#2
|
|||
|
|||
Re: kt88 power amp repair
Hi Steve, give our John Casswell a PM, just out of curiosity, what is the problem, I do fixes but only to amps I have data for. Bob
|
#3
|
|||
|
|||
Re: kt88 power amp repair
Hi bob. had a look inside it has a badly blown burnt resistor and slight damage to the pcb this is how i got it back from the person i let borrow it so could be more problems. i have not had it on power in case it did more harm.they said they broke a valve when it was on power .It is a wad kt88 power amp.
Regards steve |
#4
|
|||
|
|||
Re: kt88 power amp repair
The problem sounds familiar, it may have taken a capacitor out too or given both resistor and cap a hard time, valves will need to be tested, and or replace. Your best bet is to contact John as I don't have the data for this amp, or may be others can help. Bob
|
#5
|
||||
|
||||
Re: kt88 power amp repair
All published material on the WAD KiT/KaT88 kits is available in the archive.
|
#6
|
|||
|
|||
Re: kt88 power amp repair
Hi Steve,
If you can get it to me I should be able to fix it for you. John |
Thread Tools | |
Display Modes | |
|
|