high sensitivity speaker that moves air....

[dave dove]

i would like a 94db+ speaker
with minimal crossover
that moves serious air
and sounds very good indeed

dave dove

[NickG]

Yes, that would be a nice thing to have, I read the first installment on the new speaker in HFW, but I can't see what sensitivity it is. I was going to add this to the high power SET poll, A high efficiency speaker would allow for some interesting amps, a 211 at 600v for instance sounds rather great.

[soulminer]

Seconded. At the moment I am considering the AN/E speaker kit, and would gladly welcome a WD version that was of a similar spec, sensitivity and performance if the price was right, AND it came with the option of buying the panels to make the cabinet a la IPL. A flatpack kit if you like. Just add glue and veneer of choice. The only thing stopping me getting the AN/E at the moment, is the fact I will have to get the wood cut for the cabinets. This in itself is not totally off-putting though, as it is one of the only high sensitivity, "conventional" speaker kits available, and it will be the way I go, if I can manage to hear a pair in action. I think the world could do with more kits like this, especially to partner low powered SE amplifiers. Cheers.

[petercom]

This is one of my bete-noirs! Having played with high sensitivity speakers, ending up with the 95dB Pilastro for Mission, I really like the dynamics of high efficiency systems, whether for low or high powered amps.

However there are compromises to be made. The first WD design, the WD25A, hits 89dB with an easy drive 6 Ohm load. This is from a 10 inch bass unit in a compact enclosure.

Basically the higher the efficiency the poorer the bass response. We'll be investigating this in future designs to show the trade offs more clearly. At present the only way to hit 94-96dB with an easy drive load (Pilastro dipped to 2.7 Ohms) and extended bass performance is to crossover to a powered subwoofer.

I could go on, but I think I'll leave it for discussion in the Hi-Fi World DIY Supplement and explore the possibilities there.

Finally it is our intention to offer cut panels (or, possibly, complete cabinets) for most of the speaker kits we are developing. I'm sorting a price out for the WD25A now, and this will appear on the price list when I have it.

[KennyK]

excellent news.

I have an agreement with wood (and mdf) in that I don't work with it and it doesn't split

I'd be more willing to consider a loudspeaker kit if it was possible to buy all the pre-cut bits and assemble them like flatpack furniture, then do all the 'easy' electronic stuff.

[Global]

Hearty second for that!

Wood and I just don't get on. I would love to buy a kit complete with panels. If 'twere in MDF then I could veneer or otherwise finish it to my own tastes,

Mark

[Dave Senior]

Hi Guys

The speaker kit looks very interesting. I too have looked at the AN-E, but its a bit big for my room and is designed for corner placing, so I would have to move all my furniture around, which no doubt, would displease she who must be obeyed!! So the kit looks a good size and I already have stands.

I built a pair of Fostex FE167's into a bass reflex enclosure during the summer. In many ways they are very good, but I've gone back to my Ruark floorstanders which are more balanced.

I did not get on very well with the woodwork side of things. The trouble is you get the wood cut accurately, but when it comes to sticking all the pieces together it goes slightky out of square so you end up having to do loads of sanding to get the thing half decent. Perhaps a flat pack kit would address this issue, or someone could suggest the secret of sticking it all together.

Regards

Dave

[michael orme]

200db, 5hz-50khz, single driver.
For about £200-£300?
It is 2006!

[Martin213]

http://i50.photobucket.com/albums/f3...udspeakers.jpg

Something like these???

[Rob042]

not for me , they look to have very low waf

Rob