Marantz/Philips CD40 squealing!

[Richard]

Hi Guys,

I have 2 of these, one was quiet but now they both make a squealing sound for a second or two at switch on.

It seems to be from the drawer rubber band drive trying to close the draw which is already shut. They've both had new tray gears and bands recently. I tried wiping the bands and wheels with alcohol. Anyone had similar or know the fix?

[colin.hepburn]

Hi Richard
No help sorry just to say my Marantz 52SE sometimes does the same thing never have found out the problem and it tries to take my fingers off by opening and closing on its own when inserting a disc on occasions

[offanonone]

Sounds like the cash till in Open all hours

[colin.hepburn]

Originally Posted by offanonone

Sounds like the cash till in Open all hours

GGG Granville

Richard


squealing sound at switch on is mostly due to the removal of the mute transistor with pre volume up at listing level I hear this on both my marantz 52SE and the 67 mk2 if I have left the vol up

[Richard]

ha ha love the picture but this is a mechanical noise from the drawer, a sort of creaking squeal and is there just powering up the player alone without any other connection. With the cover off you can see the motor trying to close the draw and the belt squealing. What I don't know is if there should be a microswitch circ telling it that the drawer is already closed, or if it does this anyway to check the drawer is closed and stops trying after a set time or no more movement is detected. If that is the case it may just be that the belts are both too slippy or soft.

[colin.hepburn]

Ho right
In the 52SE there’s a white bar at the back right which the tray hits and pushes back and down
Operates a micro switch I think it’s a long time since I have been under the bonnet of the 52 it may be the white bar that’s sticking and riding on the switch
I can see the tray on My 52 give a small sort of wiggle at switch on I think the white bar is the sources of my 52s tray opening and closing randomly when inserting a disc