Operation of an EL/32W

[orbscure]

Hi guys... I have a World Designs EL34/32W Integrated seen below here at chez orbscure to demo:



However, as it was supplied as seen and without a manual, I need to determine a couple of things before I fire her up:

1. What does the three-position unmarked knob in the centre of the fascia do?

2. What are the two toggle switches on the right-hand side for and how should they be set? Possibly to select triode and pentode modes?

3. Is a .pdf of the manual available please?

Many thanks in advance
Pete

[Richard]

Hi Pete and welcome,

It looks like KIT34 integrated but there's a chance it's more home-brew. The centre knob position would/may still be the Tape/Source selector switch.

Let us know the valve line up and

if it has EI (square) transformers or a large torroid (round) mains transformer.

Remove the base and see if it is all tagboard construction or built on a pcb.

Check also the toggle switches on the side which weren't on any WAd/WD amps.

Yes schematics are available but you will need to investigate a little first.

Rich

[willslenco]

It would be helpful to post pics with cover taken off and also inner workings.

[orbscure]

Many thanks chaps... I'll strip her down and report back on the points requested

[orbscure]

Here we go chaps... some top shelf valve amp inner pictures for you..

https://www.dropbox.com/sh/dw3j3lrz1...iSUFCKssa?dl=0

The valve compliment is:

2 x ECF80/P2JM1
4 x Sovtek EL34/6CA7
2 x 5U3C/OTK76

[willslenco]

Certainly looks 'home brew', toggles appear to be speaker output switches? and as already suggested the middle knob is likely tape/source related?