Some my DIY projects "J&N"

[Jororaitchev]

Hello,
A model of my DIY loudspeakers i have served Ti6k- JBL. My first contact with
them, was in distant 2005.
I started working with them in 2009 and finished in 2012.
The loudspeakers are "SEAS"- Excel / Tw-1”, Mw-5”for center 2? 5.5”,Bass-8,5”/ and cross-over parts- "Intertechnik".

Nominal impedance- 8 Oh,Freguency Range 30Hz-20kHzCharacterstic, Sensitivity(2,83V/1m)- 87db
Long Term-110W.
Have are some pictures, if there is interest, i will continue.
Regards!

PS;
In order to save time, I will allow myself a clarification:
Everything in this project-idea, design filters the overall workmanship of the cabinets to the last detail was done by my hands.

[colin.hepburn]

Hi Georgi
And Welcome to WD
Very Nice Work indeed

[Chris]

Really nice work..do you have any photos of the actual build? I have the Seas tweeter in my Wad kls 10's. What amplifier are you using to drive them?

Chris.

[Jororaitchev]

Originally Posted by Chris

Really nice work..do you have any photos of the actual build? I have the Seas tweeter in my Wad kls 10's. What amplifier are you using to drive them?

Chris.

Thanks !
Of course I have detailed photo material, but I have limitations in the number of photos to publish. Do not know if I can do several consecutive posts?

I've sold these speakers for Christmas, I have no idea what amplifier he listening to (I know for sure it's DIY), and the client is very pleased with their sound.
Now I work on his order for rear speakers.
Joro

[Jororaitchev]

Originally Posted by colin.hepburn

Hi Georgi
And Welcome to WD
Very Nice Work indeed

Before I start the comments in this forum I want to apologize for my poor English, do what I can!
Excuse me!
Joro

Thank you for the good evaluation of my work!

[Jororaitchev]

I show you how was made the speakers ;
First did this "home-matrix",

[Jororaitchev]

After i bended 8 layers / 4mm / MDF;

[Jororaitchev]

After assembly, veneering with " Bird's Eye View" / "Bird's eye " veneer/;

[Jororaitchev]

The finish is 35-40 layers of acrylic auto varnish and after each layer;

[Jororaitchev]

This is my other work in the initial phase;