|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| General For anything else WD or hifi |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
23rd October 2006, 01:15 PM
|
||||
|
||||
Solid state Tant caps
Good day all
Has any one used these solid state Tant caps as cathode by - pass caps especially in the input stage of a valve amp. I read these caps have got excellent qualities and are the cap to be used above any other electrolytic. Acorn 
|
|
#2
29th October 2006, 10:42 AM
|
||||
|
||||
Re: Solid state Tant caps
They are very good at smallish values and voltages, depending on type of manufacture, and we are planning to offer them in our forthcoming preamp Pre3. In many cases they can be a good bypass cap for higher value electrolytics.
|
|
#3
29th October 2006, 04:23 PM
|
||||
|
||||
|
Re: Solid state Tant caps
Hi Peter
I have tried them on the cathode as a by pass cap on my input valves and they have excellent high frequency performance, the best I have heard so far, unfortunatley, has you pionted out they only seem so come in low voltages, but thats fine for low voltage pre amp stages.. Acorn
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Solid State Class A Amplifier | Richard | Wish List | 64 | 11th January 2013 01:54 AM |
| Rectification: solid state Vs. valve. | andrew ivimey | General | 10 | 30th September 2006 12:59 PM |
| Solid State | andrew ivimey | Amplifiers | 1 | 26th March 2006 10:18 PM |
| Solid State Diodes - Choice | FAQ Team | FAQ - Upgrades and Tweaks | 0 | 12th January 2006 01:06 PM |
| Valve or Solid State Rectification | Richard | Wish List | 4 | 1st January 2006 06:43 PM |
Hybrid Mode
