|
Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
WD Amplifiers For discusson of World Designs Amplifiers |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Replacement ECF80
Hi, I have the upgraded WDKEL84; one channel has now a rustling noise on one channel. Swapping the ECF80s around moved the noise to the other channel so methinks I'll soon need some new valves.
I'm after recommendations. The stock valves have served me well but I don't mind paying a bit more if there's an increase in sq. Many thanks, Richard. |
#2
|
|||
|
|||
Re: Replacement ECF80
Hello. When I had a KEL84 I got RCA ECF80 valves from Watford Valves. They said they were made for RCA by Siemens and I found them very good (better than the standard valves supplied).
I have just checked the Watford Valves website and they have a wide variety of ECF80s available. The RCAs are still available but have gone up in price a bit. Watford are also NOS Mullards, which are likely to be very good, at a lower price than the RCA and they also have cheaper Pinnacles which they say were probably made by Tungsram and are very good. Regards, Alasdair |
#3
|
|||
|
|||
Re: Replacement ECF80
Most ECF80 are a bit hit and miss with regard to voltage, I tried many with a KAT6550 but they all sounded the same to me and my chum. Bob
|
#4
|
|||
|
|||
Re: Replacement ECF80
Thanks; I'll do some more research. Cleaning the pins on the present stock valves is my first step.Does anyone use deoxit?
Regards, Richard |
#5
|
|||
|
|||
Re: Replacement ECF80
Hi Richard,
Pinnacle were a valve reseller so you could get any make of valve for the ECF80. Buyer beware! You could also look out for the E80CF which is a Hi reliability industrial version. Also have a look at the FAQ to see my comments re all of them. John |
#6
|
|||
|
|||
Re: Replacement ECF80
Thanks John; will do; much appreciated.
Richard PS I've done a search on the FAQs and can't find anything. Any chance you could give me a direct link? Many thanks, BW Richard Last edited by Bonky; 25th March 2021 at 10:14 PM. |