|
Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
Amplifiers Your DIY amplifier designs |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
50W SEM amp.
SEM = single ended mosfet.
Using 1 X IXCS IXFN140N20P mosfet per channel, and another one as a CCS. So four big mosfets in total, and a circuit courtesy of "papa Pass". I'm just collecting parts at the moment, already found two 15A 60v EI transformers and got some lovely heatsinks a while ago. Photo to follow when work commences.
__________________
Philip. Everything in this post is my honest opinion based on what i thought I knew at that very moment in time. |
#2
|
||||
|
||||
Re: 50W SEM amp.
I'm making two boxes for the power supplies at the moment, from 18mm BBP.
The pieces are all cut (by hand saw), and are now being routed to the exact size. Stage 2 is to rout all the joins so they go together square.
__________________
Philip. Everything in this post is my honest opinion based on what i thought I knew at that very moment in time. |
#3
|
|||
|
|||
Re: 50W SEM amp.
Nice one Philip, is it a finished circuit or a "try this" ?
|
#4
|
||||
|
||||
Re: 50W SEM amp.
Well, I suppose it's a "try this" at the moment. There is a thread on DIY Audio about it , and by the time I've got to the point of finishing it I hope someone else will actually have one working. I'm still in routing BBP mode at the moment.
__________________
Philip. Everything in this post is my honest opinion based on what i thought I knew at that very moment in time. |
#5
|
|||
|
|||
Re: 50W SEM amp.
Ah ok thanks Philip, had a quick look there but couldn't see it. Be interesting to hear how you get on (What's BBP btw - Baltic Birch Ply?)
|
#6
|
||||
|
||||
Re: 50W SEM amp.
Quote:
I had a full sheet (1200 x 2400) in stock so decided to use some.
__________________
Philip. Everything in this post is my honest opinion based on what i thought I knew at that very moment in time. |