|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| General For anything else WD or hifi |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
31st May 2022, 08:17 PM
|
|||
|
|||
Advice on Panting speaker stands
Hi All
My ATACAMA SE24 STANDS They were cleaned with something that stained them White see images So going to be repainting them any subjection on the best way of doing it what paint to use and hand pant or rattle can them Colin
__________________
 The Blues man   Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member 
|
|
#2
31st May 2022, 08:23 PM
|
|||
|
|||
|
Re: Advice on Panting speaker stands
Powder coating Colin, its the best. Bob
|
|
#3
31st May 2022, 08:39 PM
|
|||
|
|||
|
Re: Advice on Panting speaker stands
Quote:
Yes through of that but there is nowhere in my area that I am aware of to do it colin
__________________
The Blues man Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member
|
|
#4
31st May 2022, 09:06 PM
|
|||
|
|||
|
Re: Advice on Panting speaker stands
Surface Technology - Aberdeen
Site 14, Greenbank Rd East Tullos Aberdeen AB12 3BQ Scotland Tel: +44 (0)1224 515320 Appears to be on the south edge of Aberdeen. This is not a personal recommendation - just the first one I found in a few seconds on google.
|
|
#5
31st May 2022, 11:21 PM
|
|||
|
|||
|
Re: Advice on Panting speaker stands
They may need to be stripped back to metal if originally powder coated, then new powder coat applied, might be easier to just rattle can and lacquer them. I know this from experience with some old Mission speaker stands.
|
|
#6
1st June 2022, 06:29 AM
|
|||
|
|||
|
Re: Advice on Panting speaker stands
Most powder coaters will have their own paint striping plant or they contract out to another firm. Sorry Nigel, but rattle can paint is very poor compared to powder. Bob
|
Hybrid Mode
