|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| WAD Problems For questions and answers re older World Audio Design Projects |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
17th September 2020, 12:01 PM
|
|||
|
|||
Wad hd83
Hi there,
I have been using a HD83 for a long time now with a pair of Sennheiser HD600's. With the HD83 output TX's set at 300 ohms. My Question is does anyone have the info how to change the impedance. As I have bitten the bullet and bought a new pair of cans the Quad ERA-1 with the impedance of 20 Ohms. 
|
|
#2
17th September 2020, 05:46 PM
|
||||
|
||||
|
Re: Wad hd83
The means to do this will be in the build instructions. I am away from home at present and don’t have access to the archive, but I return tomorrow evening, so PM me your email address and I’ll respond over the weekend.
|
|
#3
17th September 2020, 06:09 PM
|
|||
|
|||
|
Re: Wad hd83
If its the WAD it involves a lot of soldering and if its WD it is changed by dip switches, let Greg know what it is. Bob
|
Hybrid Mode
