|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| Sources Your DIY source designs (turntables etc.) |
|
|
Thread Tools | Display Modes |
|
#1
23rd March 2014, 05:32 PM
|
|||
|
|||
DC voltage when switching to phono
This is unrelated to Andy’s CF thread and any of the modes I have done recently to my WD CF pre
But There is a rather alarming crack when switching to and from the WD phono 2 nothing to do with my recently add CF preamp but it happens with any pre it is connected this is an old fault as I just took it for granted it was a problem with the relay SW selector on the Nad amp i was using Only to eliminate this thought when I started to use the WD CF pre as the loud crack is still there  any thought on this pleas 
__________________
 The Blues man  Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member 
|
Threaded Mode