|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| WD Other Parts and Projects All other WD Parts and Projects |
|
|
Thread Tools | Display Modes |
|
#33
27th August 2020, 08:43 PM
|
|||
|
|||
Re: WAD Psu3 replacement Board Build
I had to remove the selector switch to get the CF pre apart Easy.
Know I can’t line up the input selector switch? as it was With the front panel inputs as marked I only have the Switcher manual for the WD88 amp. It says to insert the guide washer in position 6 on the switch but with the hole to stop the switch from turning in the front panel lined up. I can’t select all inputs as marked on the front panel plus the switch selects the other way as well so it won't line up correctly. any thoughts on this i seem to get the same source on two positions on each side of the switch PS I have never set this type of switch up before today Thanks Colin
__________________
 The Blues man   Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member 
|
Threaded Mode