|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| Amplifiers Your DIY amplifier designs |
|
|
Thread Tools | Display Modes |
|
#1
30th August 2020, 03:09 PM
|
|||
|
|||
New Pre amp thingy
Hi All
Ok so here is the new Buffer Pre I had it up and running last night just with a single input for testing running it from the WDPSU3s 200-volt line and it sounds very good a little darker perhaps and has more depth and wider sound staging than the WAD CF Pre. I am going to keep running it for a time just to see if I will stick with it then I may put it in the CF Pre Case with a new relay board from Mathew The good thing is as I had most of the parts to build it to hand it has only cost me less than a tenner to date for the PCB which uses three valves two 6922/12au7 I am using two Russian 6H1-EB and a JJ12A7 Take a look at the Schematic and give you opinion on it images here https://ibb.co/F0RFqNv https://ibb.co/Bff7D4r
__________________
 The Blues man   Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member Last edited by colin.hepburn; 23rd November 2022 at 05:05 PM. Reason: update to thread title 
|
Threaded Mode