KiT 6550 ECF 80 Pin 6 Voltage

[TimN]

I've just been tinkering with my 6550 fitting some new caps C7/8, C11/12/13/14 (Soniqs SAX) and on testing voltage on completion the voltages at Pin 6 on V3/V4 are out of tolerance, V3 above and V4 below.

V3 is 155.4V and V4 is 109.8V. Tolerance range is 110V-149.5V.

All other voltages seem OK.

Does anybody have any ideas why this might be?

Is it important?

I've only managed a short listen to it so far, but it seems OK beyond the new caps aren't burnt in yet.