|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| General For anything else WD or hifi |
 |
|
|
Thread Tools | Display Modes |
|
#1
13th April 2007, 10:19 PM
|
|||
|
|||
tube cad software any good
Hi All
Has anyone got and use this tube cad SE amp software i have been thinking of getting both tube cad/SE amplifiers if is works and it takes away the maths as i am no good as this maths stuff so mite be what i an looking for http://www.glass-ware.com/tubecad/ your comments welcome thanks Colin
__________________
 The Blues man   Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member 
|
|
#2
14th April 2007, 07:32 AM
|
|||
|
|||
|
Re: tube cad software any good
Tube CAD is very good indeed!
Many posters here will tell you that it must not be used as a substitute for real understanding, though. It's an aid to design and not a substitute for an understanding of the principles involved. I found that it increased my understanding of the circuits as you could actually see what happened as you changed the components. Mark
|
Linear Mode
