|
Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
Problems For questions and answers re World Designs Projects |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Musical Fidelity CD player
Hi all, I have had the above from new, and now the optical output is non operational, there is no light at all from the transmitter, the transmitter is a plastic housing with legs soldered to the PCB, is it worth getting a new one?, or would the problem be more dramatic. Thanks. BOB
|
#2
|
|||
|
|||
Re: Musical Fidelity CD player
Hi Bob,
Are you getting the coax output? Check that you are getting +5V on at least one of the optical block pins and that one of them is at earth potential, as normally the coax and optical outputs are wired in parallel. John |
#3
|
|||
|
|||
Re: Musical Fidelity CD player
Thanks John, I am getting coax output, will need to disassemble compleatly and check the 5 volts and ground, I will report back.
|
#4
|
|||
|
|||
Re: Musical Fidelity CD player
Hi John, I have got the results of your asking, pin 1 earth and 0 ohms to all other ground points, pin 2, +5 volts DC, pin 3, +5 volts DC, pin 4, 2.5 volts DC, the plastic housing is a little wobbly, but the solder connections to the PCB are good. BOB
|
#5
|
|||
|
|||
Re: Musical Fidelity CD player
An update on the optical transmitter, after all appeared to be correct with John's test's, I desoldered the pins to remove the transmitter and one of the pins came out with the solder sucker, clearly this must be the problem, a new part has been sourced from Musical Fidelity and should be here soon, I will report later. BOB
|
#6
|
|||
|
|||
Re: Musical Fidelity CD player
Hi Bob,
Sounds like that's sorted. John |
#7
|
|||
|
|||
Re: Musical Fidelity CD player
Part arrived this morning, FOC, excellent service from MF, fitted and all working, many thank's to John. BOB
|