World-Designs-Forum  

Go Back   World-Designs-Forum > For Sale/Wanted > Suppliers
Register FAQ Members List Calendar Gallery Today's Posts Mark Forums Read

Suppliers Recommended Component Suppliers (and the ones to be avoided)

Reply
 
Thread Tools Display Modes
  #1  
Old 20th November 2018, 01:48 PM
Richard Richard is offline
Super Moderator
 
Join Date: Dec 2005
Location: Notts
Posts: 5,357
Default Rifa suppressors to avoid

This is the 2nd one of these I've had go in use and every one I've seen in equipment has already failed. I fitted this only 2 years ago from a pack of 5 from RS. Acrid smoke and the fuse blew a few mins after switch on.

A quick Google shows it's a common problem with this metallised paper type of cap both in cap-only form and the RC network suppressor seen here. I'm amazed they're still being made and sold. No harm done but it may have been different if I'd been leaning over it when switching on after servicing - so be warned.

I checked 2 left in the packet. One is cracked open and it's never even been fitted and the other has the start of a fracture visible. So I made up networks from a 47nF plastic film X2 cap and 100R 2W metal oxide resistor. Space was a bit tight but a bit of creative bending got around that, pics attached.
Attached Images
File Type: jpg RifaNew.jpg (37.4 KB, 52 views)
File Type: jpg RifaSub.jpg (36.1 KB, 46 views)
Reply With Quote
  #2  
Old 20th November 2018, 06:25 PM
Phil Y's Avatar
Phil Y Phil Y is offline
Senior Member
 
Join Date: Jul 2006
Location: Bristol, UK
Posts: 816
Default Re: Rifa suppressors to avoid

Interesting Richard,

I have recently fitted 2 Rifa suppressors, although they are are the 3 pin (1x & 2y) 3 capacitor type. I will have to keep an eye on them!

Phil.
__________________
Commission for Dark Skies (CfDS)
Reply With Quote
  #3  
Old 20th November 2018, 07:57 PM
Richard Richard is offline
Super Moderator
 
Join Date: Dec 2005
Location: Notts
Posts: 5,357
Default Re: Rifa suppressors to avoid

Ah yes, are they the delta caps in the mains filter Phil? If so they should be easy to keep an eye on. I had mine in for several years and they were no trouble. 20 years and I can understand a cap failing but not 2 years like these others...
Reply With Quote
  #4  
Old 21st November 2018, 09:14 AM
bob orbell bob orbell is offline
Senior Member
 
Join Date: Nov 2009
Location: kettering northants.
Posts: 2,733
Default Re: Rifa suppressors to avoid

Very interesting Richard, I too use that very same capacitor in power amp and two PSU's, they have been there for more than 8 years, my mains voltage is also very high, could be you have a **** batch, might be worth bringing this to the attention of RS, they are very good when it comes to customer problems and faulty goods, irrespective of the product price. Bob
Reply With Quote
  #5  
Old 21st November 2018, 12:41 PM
Richard Richard is offline
Super Moderator
 
Join Date: Dec 2005
Location: Notts
Posts: 5,357
Default Re: Rifa suppressors to avoid

Hi Bob, yes I'm a fan of RS too and get much of my stuff there.
I can only relate my own experience which is of several failures going back to 1986 but Google "rifa capacitor failure" and you may be surprised.
Reply With Quote
  #6  
Old 26th November 2018, 11:34 AM
Richard Richard is offline
Super Moderator
 
Join Date: Dec 2005
Location: Notts
Posts: 5,357
Default Re: Rifa suppressors to avoid

A quick follow-up,

Re. Phil and Bob's comments about the mains delta cap; whilst sorting through the box for some bits over the w/e I found the last of my 5 RS 239668 delta caps in it's bag perhaps 10 years old. It's not used and shows no problems visually with a magnifying glass. These are still for sale on RS site.

Checking RS for the 47nF 100R network RS 2067847, it is showing as discontinued and a search of RC networks shows no alternative in that value.
Reply With Quote
  #7  
Old 26th November 2018, 12:02 PM
Phil Y's Avatar
Phil Y Phil Y is offline
Senior Member
 
Join Date: Jul 2006
Location: Bristol, UK
Posts: 816
Default Re: Rifa suppressors to avoid

Interesting Richard,

Maybe the problem is restricted to the R-C ones only then and I can relax. Still interesting to know though. If I come across one of the R-C Rifas at any point I will certainly swap it out.

Thanks for sharing the info.

Phil.
__________________
Commission for Dark Skies (CfDS)
Reply With Quote
  #8  
Old 26th November 2018, 02:26 PM
bob orbell bob orbell is offline
Senior Member
 
Join Date: Nov 2009
Location: kettering northants.
Posts: 2,733
Default Re: Rifa suppressors to avoid

Yes ditto that Richard.
Reply With Quote
  #9  
Old 28th February 2019, 01:15 PM
Pingushome Pingushome is offline
Senior Member
 
Join Date: Feb 2006
Location: Wales
Posts: 221
Default Re: Rifa suppressors to avoid

I’ve had these made up and used for many years, since the original post on here about making the little unit up and have had no probs now I’m checking regularly
Martin
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 11:40 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright World Designs