WD88VA XL KT88 feet

[eldarvanyar]

Hi all,

I have a WD88VA XL KT88 integrated amp which I bought a couple of years ago and am the second or third owner.
It has been fitted with 3 oak cone feet and I would rather revert back to 4 feet. Are you able to advise on the diameter of the threads for the feet, i.e. M4, M5, M6.
Also, are there any suggestions as there are so many to choose from.

Thanks and happy new year

[bob orbell]

The original feet were square stick on rubber, you can fit what ever you chose, I made mine from stainless steel counterbored to take round stick on rubber feet, this also brings the amplifier higher and adds more cooling air from underneath. Bob

[eldarvanyar]

Originally Posted by bob orbell

The original feet were square stick on rubber, you can fit what ever you chose, I made mine from stainless steel counterbored to take round stick on rubber feet, this also brings the amplifier higher and adds more cooling air from underneath. Bob

Thanks Bob

[Pingushome]

Hi,
I used Vibropods, the larger round ones not the cones. However the cones on their own or together with the pads will give you even bigger gap.
FYI analogue seduction do a buy now pay later offer ATM but I’m sure you can find others too
Martin