|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| WAD Problems For questions and answers re older World Audio Design Projects |
 |
|
|
Thread Tools | Display Modes |
|
#81
6th February 2022, 01:53 PM
|
|||
|
|||
Re: KEL34 making safe to work on
Drilled out for, cut and soldered both sides 25 tabs for external connections to board once it is fitted in chassis.
 
__________________
malcolm ("You can't shine if you don't burn" - Kevin Ayers) If what I'm hearing is colouration, then bring on the whole rainbow 
|
|
#82
6th February 2022, 01:54 PM
|
|||
|
|||
|
Re: KEL34 making safe to work on
Mains transformer
  Output transformers 
__________________
malcolm ("You can't shine if you don't burn" - Kevin Ayers) If what I'm hearing is colouration, then bring on the whole rainbow
|
|
#83
6th February 2022, 06:13 PM
|
|||
|
|||
|
Re: KEL34 making safe to work on
Very nice Malcolm it will look classic in green hammerite
 I still have an unused pcb, same number as yours. It was a bit of a shock to realise it must have been in my box over 20 years, scary where the time has gone. I have a good pair of OPTXs too but no mains TX or chassis 
|
Linear Mode
