World-Designs-Forum  

Go Back   World-Designs-Forum > World Designs > Problems
Register FAQ Members List Calendar Gallery Today's Posts Mark Forums Read

Problems For questions and answers re World Designs Projects

Reply
 
Thread Tools Display Modes
  #11  
Old 20th March 2023, 06:38 PM
G Willis G Willis is offline
Member
 
Join Date: Mar 2017
Location: UK
Posts: 43
Default Re: Help needed the Pre-3 CF CSS Config.

Thank you for the offer but its working fine now and I'm happy withbthe sound.

(CSS is a typo - I am a software developer and CSS crops up)
Reply With Quote
  #12  
Old 21st July 2023, 11:07 AM
bob orbell bob orbell is offline
Senior Member
 
Join Date: Nov 2009
Location: kettering northants.
Posts: 2,731
Default Re: Help needed the Pre-3 CF CSS Config.

Looking at Grahams problem with the CCS, I am now building one, and I think the problem may have been caused by Graham fitting the wrong valve. With the ECC83 he would have had about 50 volts DC into the ground, this would have found its way to the collector of Q2 / 12 via VR2 / 12 and R7 / 17, it may have damaged Q2 / 12. With the correct ECC88 6922 this would not have happened. May be John C could comment. Bob
Reply With Quote
  #13  
Old 21st July 2023, 01:54 PM
bob orbell bob orbell is offline
Senior Member
 
Join Date: Nov 2009
Location: kettering northants.
Posts: 2,731
Default Re: Help needed the Pre-3 CF CSS Config.

Just finished mine and the set to CCS, switched on and measured the CCS voltage and adjusted with the trimmers to the recommended 0.84 volts with no problems, I suggest Graham tries again with the correct ECC88 valve, if it still does not come up to the correct voltage then it must be a malfunction. I did offer to have a look at it and the offer still stands. Bob
Reply With Quote
  #14  
Old 21st July 2023, 04:37 PM
John Caswell John Caswell is offline
Super Moderator
 
Join Date: Dec 2005
Location: Wokingham, Berkshire
Posts: 1,780
Default Re: Help needed the Pre-3 CF CSS Config.

The Pre3 CF uses an ECC88/6DJ8/E88CC and the like and is a different pin to the ECC81/2/3 range of valves.

John
Reply With Quote
  #15  
Old 21st July 2023, 04:57 PM
bob orbell bob orbell is offline
Senior Member
 
Join Date: Nov 2009
Location: kettering northants.
Posts: 2,731
Default Re: Help needed the Pre-3 CF CSS Config.

Yes John, indeed, but read post 7 and that will / should jog your memory, Graham states in post 7 that he used a ECC83, and that he could not get the voltage up to the 0.84 volts with CCS configured. Bob
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:33 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright World Designs