CD player output caps - bg panasonic philips

[john & Jake the dog]

Hi, just ordered this from Ebay, thanks for the tip, £27 inc postage.
http://www.ebay.co.uk/itm/2707912728...#ht_2366wt_905
It's going in my 6000ose as a start. I like the on board regulation.

[john & Jake the dog]

Hi, anybody any experience with the Nichicon Muse series here for signal path
http://products.nichicon.co.jp/en/pdf/XJA043/e-kz.pdf

[alnewall]

Hi, anybody any experience with the Nichicon Muse series here for signal path

It's a bit like any other cap. You get both good reports and people slagging them off.
They do seem to crop up in some commercial stuff these days. Don't know if that's a recommendation or not really.

[john & Jake the dog]

hi, found this interesting test

http://tech.juaneda.com/en/articles/...apacitors.html

[pre65]

Originally Posted by john & Jake the dog

hi, found this interesting test

http://tech.juaneda.com/en/articles/...apacitors.html

Just remember that it is not a statement of fact, just how he hears things.

[john & Jake the dog]

Hi I know philip but he's done some research and all we have to go on are other peoples opinions/findings otherwise we'd be soldering capacitors until the cows come home and I've seen what too much soldering does to a Marantz pcb, (or that could've been me).

Anyway could I possibly beg some more help.
Here's the audio section of the Marantz, I previously have put Black gates at
2219 through 2226.
And larger silmics at
2213
2214
Could you please tell me which of the black gate positions are signal and are there any more positions in the signal path.
Black Gates are in short supply so I want to maximise them.

cheers

[john & Jake the dog]

Forgot the PCB link but posted above now

[john & Jake the dog]

Hi, I've been recommended to change the two op-amps 2114d for LM4562NA.
Looked at this and it looks like a serious audio chip.
Could be a general cd player mod.

[john & Jake the dog]

hi
I'd like to try film caps if pos for 2219 through 2222, Is that possible and what size would you suggest 220uf at the mo.

[john & Jake the dog]

Originally Posted by Richard

This is the clock I used, very pleased with it, comes in different speeds, this 11meg for the CD40,

http://www.ebay.co.uk/itm/2905478950...fvi%3D1&_rdc=1

Hi Richard
as I've just ordered the same clock, different frequency, could you let me know the best way to power it separately from the cd board supply, cheers