|
Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
WAD General For discussions re World Audio Design |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Re: WD/WAD PSU PHONO II Choke upgrade
Good to see the Hammond choke upgrade is liked
Here is how it happened It was just a pure chance I fitted it when I was upgrading the PSU II to feed the CF Pre So had I not fitted the wrong Zener Diode which gave me 100 volts instead of the required 200volts this lead me too recheck the HT across the WAD Choke and checking the DCR so all was fine with the choke So fitted the correct Zener this time and all was good 210volts to CF Pre I then checked the phono HT, which has always been a bit high so knowing the DCR of the WAD Choke the light came on, wait a minute I have a Hammond 157G Choke, which has a higher DCR so fitted it in place of the WAD choke phono HT drops a little Well you know the outcome of this upgrade
__________________
The Blues man Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member Last edited by colin.hepburn; 1st May 2014 at 09:44 PM. Reason: Added Text |
#12
|
|||
|
|||
Re: WD/WAD PSU PHONO II Choke upgrade
I take you mean Guy Pettigrew Richard, I hope he see's this and gives a comment. I am getting my chums PSU on monday now, so will have a listen for a day and make a judgement. BOB
|
#13
|
|||
|
|||
Re: WD/WAD PSU PHONO II Choke upgrade
Yep, that's the feller Bob, hi Guy if you're still visiting
|
#14
|
|||
|
|||
Re: WD/WAD PSU PHONO II Choke upgrade
You guys just cost me £20.
Just ordered a 157G from Bluebell Audio, excellent chap and service. Thanks for the info gents....even if you are bad for my wallet=) |
#15
|
||||
|
||||
Re: WD/WAD PSU PHONO II Choke upgrade
Honestly it's £20 well spent - and such an easy modification. I've just spent hours carefully replacing caps, resistors and wiring in my Kecl82 in order to get a real upgrade in the sound. You'll only have to solder two wires
|
#16
|
|||
|
|||
Re: WD/WAD PSU PHONO II Choke upgrade
Quote:
Hi Dik Yes 4 Pints and a pack o Crisps Worth Pleas let us all know what you think of the Choke upgrade it be good to hear you views Cheers Colin
__________________
The Blues man Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member |
#17
|
||||
|
||||
Re: WD/WAD PSU PHONO II Choke upgrade
Cheap.
I've just ordered two chokes for my 833a amp and they weigh 9.5Kg each.
__________________
Philip. Everything in this post is my honest opinion based on what i thought I knew at that very moment in time. |
#18
|
|||
|
|||
Re: WD/WAD PSU PHONO II Choke upgrade
Crikey that's expensive beer...
|
#19
|
||||
|
||||
Re: WD/WAD PSU PHONO II Choke upgrade
Ha ha, when did you last go to a quality pub?
Maybe beer is cheap in Nottingham because of the risk of getting shot on a night out |
#20
|
|||
|
|||
Re: WD/WAD PSU PHONO II Choke upgrade
OK Then 5 Pints And £25 smackers for taxi home from town
__________________
The Blues man Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member |