|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| Problems For questions and answers re World Designs Projects |
 |
|
|
Thread Tools | Display Modes |
|
#11
24th November 2011, 11:26 AM
|
|||
|
|||
Re: KEL84 clicks and pops from right channel?
It's taken a while but I think I may have resolved this issue. It looks like it may have been an issue with one or more valves not fitting tightly enough in their socket. All the other things I tried didn't make any difference but after bending all the valve pins in a little so that they made a tighter fit I've so far not had any clicks or pops. So I'm really hoping that was the problem. Fingers crossed.
Many thanks for all your suggestions. 
|
|
#12
24th November 2011, 06:03 PM
|
|||
|
|||
|
Re: KEL84 clicks and pops from right channel?
Hi all,
"but after bending all the valve pins in a little so that they made a tighter fit" This is NOT a good idea as even a little bend is liable to fracture the glass "frit" seal as the valve is subject to heat cycles. The most satisfactory and best solution is to change the base, I know it is a pain but it is cheaper than a new valve. John
|
|
| Tags |
| click, clicking, kel84, pop, problem |
|
|
Linear Mode
