WAD Transformer Numbers Help Please

[Richard]

Hi Philip
Those figures sound right for K5881 then. That was EI and ran 360v with no centre tap onto a bridge for ht and powered the heaters of 4 el34 and the small valves.
Rich

[pre65]

Thanks Richard.

Should be enough for my needs then.

Has to run 2 off 6D22s,1 0ff 829b and a 6SN7-GT which is 5.25A,so thats a bit in "reserve".

[paul webber]

Kit/Kat 6550. I have 2 of these.
1) Mains marked D8882 gold written marking it has 51mm lamination height Gets hot and bothered (horrid) Choke unmarked
2)White labels on all inductors
Mains Design no 7546 6550 mains batch 09/02
65mm lamination stack,cool quiet (lovely)
Output Design no 7563 Hi88 4.5k p-p 8r batch 09/02
Choke Design no 7500 Identical appearance and volt drop as unmarked choke
Happy amping one and all Paul

[BOONDI]

Anyone got a manufacturer for the WDHD3 v3 headphone amp.....

Or the full spec of all the windings please.....

[Greg.]

You may have a problem here. WD's Tx's were made by Morite. They went bust towards the end of last year which added to WD's problems.

Grant Armstrong, formally Morite now works for Amethyst. Have a look at the link below and click on the heading about Grant joining them. There is an email link for Grant himself. I understand he has all the Morite designs with him so might be able to help.

http://www.amethyst-designs.co.uk/News/

Regards,

Greg

[BOONDI]

Originally Posted by Greg.

You may have a problem here. WD's Tx's were made by Morite. They went bust towards the end of last year which added to WD's problems.

Grant Armstrong, formally Morite now works for Amethyst. Have a look at the link below and click on the heading about Grant joining them. There is an email link for Grant himself. I understand he has all the Morite designs with him so might be able to help.

http://www.amethyst-designs.co.uk/News/

Regards,

Greg

Just spoke to him on the phone and he is sure he can help.....

He gave me another contact to try and if not then he will have Amythyst do me a couple of sets.....

[BOONDI]

Can anyone please tell me the D number for HD83 or WDHD3 output transformers please????

Also, can anyone measure the voltage levels on the output windinds annd the feedback winding pretty please....

[BOONDI]

WAD HD83 and WD HD3 output Tx's
Grandchain design No D8449. I believe that Graham Luscombe is the man you need to talk to about them. He is winding me 6 as I type.....

The HD83 mains was wound by Morite in Torroidal style. Grant Armstrong at Amethyst put me onto Frank at another company I think are called SP wound or something like that, who have the design for the mains.

I got Graham at Grandchain to wind me three uprated mains for a reasonable price into the bargain..... 165V@100mA and 3.15-0-315V@2A
So a bit extra juice if you need it. Filed under D9403

Shame I have to wait a couple of weeks but it should be worth it....

[BOONDI]

Just a quick update...

The Grandchain transformers have arrived, and are very very well put together. Delivery was way in advance of the agreed delivery date.
Overall very happy with the service and price I received. Gone to do a lash up now........

[audiopete]

Hi all,

just to add the following for WAD Kel34

Mains Tx - Gold Seal Tor 251

Output Tx - D8530