|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| Sources Your DIY source designs (turntables etc.) |
 |
|
|
Thread Tools | Display Modes |
|
#1
17th March 2012, 06:53 PM
|
|||
|
|||
New Rega motor Upgrade
Is anyone here still using the old rega planner 3 turntables?
See bottom of page http://www.decoaudio.com/deco_audio_..._upgrades.html As I am still running my custom planner 3 so was wondering if anyone has fitted the new 24 volt motor upgrade as I am thinking of building a new sand filled plinth with its own removable arm board and a separate motor plinth underneath  but not sure if I should stay with the old motor or go with the new 24volt unit any views on this upgrade path
__________________
The Blues man   Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2 If you have trouble reading my posts its because I am a dyslexic member 
|
Linear Mode
