|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| WAD Problems For questions and answers re older World Audio Design Projects |
 |
|
|
Thread Tools | Display Modes |
|
#1
2nd September 2006, 10:45 PM
|
|||
|
|||
psu2 problem
Hi I have a problem with my psu2 and phono 2 - while doing some work had a short and since then the phono plays music but not well. The heater supply gives about 5.8 V with no load and drops to 2.8V under load. I suspect the regulator in the psu - any ideas.
Julian 
|
|
#2
2nd September 2006, 11:08 PM
|
||||
|
||||
|
Re: psu2 problem
I would guess its either the regulator or the diodes that feed it. They are all cheap components, so I would start by replacing them.
__________________
Just about everything I say has been in public use since the 1940's so no one owns the copyright on that. If by any chance its not prior art, then the copyright is retained by me.
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| OFF TOPIC: another computer problem | Baggy Trousers | General | 7 | 8th November 2006 10:53 AM |
| OFF TOPIC: computer problem | Paul Welsby | General | 1 | 1st November 2006 02:17 PM |
| PSU II voltage problem.. help! | LSfarzo | WAD Problems | 4 | 19th September 2006 10:25 AM |
| K5881 Mk1 - baffling problem! | espidog | WAD Problems | 4 | 21st July 2006 08:52 PM |
| Phono Stage problem | Will Cowen | General | 4 | 7th May 2006 07:05 PM |
Linear Mode
