|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| Suppliers Recommended Component Suppliers (and the ones to be avoided) |
 |
|
|
Thread Tools | Display Modes |
|
#1
6th July 2009, 05:15 PM
|
||||
|
||||
Peter Beson Plywood Ltd
I can heartily recommend this Company in Darwen, Lancs who can supply CNC cut sheet material for your DIY speaker builds.
They are a very friendly and helpful bunch of guys and willing to cater for small orders for the likes of us and they don't charge the earth for the cutting service. They have a computer controlled flat bed saw that can take a full sheet of ply and the cuts are accurate and true. Better accuracy than your average flat pack from local DIY store. They also have a full bed CNC router. I have used them for some 15mm and 18mm Russian Birch Ply and 19mm Cherry veneered birch ply and have nothing but excellent service. Here is a link to their website and contact details http://www.pbplywood.co.uk/ Last edited by Toppsy; 6th July 2009 at 05:16 PM. Reason: added text 
|
|
#2
6th July 2009, 06:11 PM
|
|||
|
|||
|
Re: Peter Beson Plywood Ltd
Hi
I also used this company after seeing Colins remarks and would also recomend them. regards Dave
|
Linear Mode
