|
Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
WAD Problems For questions and answers re older World Audio Design Projects |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Pre II Instructions
I Ordered 4 kits from WAD before christmass 2004 and received the said kits by Feb 2005, so good so far.
Have built the 6550 amp, power supply and Phono II and all are working well. However last month I finaly got around to building the Pre Amp II, (my old Quad Pre amp having finaly decided to retire ). Problem is a missing page in the instruction booklett The missing page contains notes 12 to 14 of "wiring up the inputs " section. Not being that confident in the build by just following the circuit, and layout diagrams, I would appreciate it if anyone could help by supplying the missing info. My email is smeltzer_ken@yahoo.co.uk or Phone 0289 0280 891 PLEASE . |
#2
|
||||
|
||||
Re: Pre II Instructions
Hi
I've just dug out my instructions and they are the same. I think it's either just a typo and they've gotten the numbers out of sequence or points 12 - 14 were for an earlier version and have been taken out without putting the number sequence right. If I remember rightly they removed some unnecessary components/wiring from the PCB and instructions to produce a revised instruction booklet. Someone might be able to put me right here. If you look at the PCB it says "version/issue 2" somewhere I think. But I can't confirm that without taking the lid off. I built mine without points 12 - 14 and it worked straight away. I never noticed they were missing until now. Steve. |
#3
|
||||
|
||||
Re: Pre II Instructions
Hi this is a link to the WAD instruction pdf hope it helps http://www.worldaudiodesign.com/pdf/predinst.pdf
__________________
David "I always wanted to procrastinate, but I just never got around to it." |
#4
|
||||
|
||||
Re: Pre II Instructions
yeah, mine were missing part ofthe instructions too,
IIRC, it's mostly just wiring the inputs to the selector switch, which should be straightforward enough, if a little time consuming... |
#5
|
|||
|
|||
Re: Pre II Instructions
Thnx for the help given
Pre II built and working like a dream A note for anyone else building this item:- When wiring up the inputs to the Rotary selector follow the Locations on the pin diagram of the Selector switch on the same page as the circuit diagram because if you follow the pin diagram on the last page the Left and Right channels for Aux 3 become reversed.
__________________
Valves + Vinyl = Happy New Ear |
#6
|
|||
|
|||
Re: Pre II Instructions
the link to the pdf takes me nowhere (it may be different for others). Does anyone have a paper copy of the Pre II instructions that I can get a copy of? Thanks
Or a scanned electronic version of course Adrian |
#7
|
||||
|
||||
Re: Pre II Instructions
sorry Adrian, it's just worked ok for me,
if you need it, go into the main WAD site and look up the PreII you can get to it on the right hand panel
__________________
David "I always wanted to procrastinate, but I just never got around to it." |
#8
|
|||
|
|||
Re: Pre II Instructions
The WAD site seems to have removed some useful info. The detailed instructions aren't there - merely diagrams
Adrian |
#9
|
||||
|
||||
Re: Pre II Instructions
sorry again Adrian
I think that's all I had anyway, just the pictures
__________________
David "I always wanted to procrastinate, but I just never got around to it." |
#10
|
|||
|
|||
Re: Pre II Instructions
Buddam Now mine is working I can scan my instruction Book and Email it to you .
If your happy to publish the address on here. that is
__________________
Valves + Vinyl = Happy New Ear |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A complete newbie builds KEL84 (hopefully) | graeme | WD Amplifiers | 189 | 31st July 2007 10:34 PM |
Wiring diagrams....... | Brian | Wish List | 17 | 19th June 2006 01:39 PM |
KEL 84 odd readings | buddam | WAD Problems | 8 | 31st May 2006 08:02 AM |
PSU11/Phono11 - voltage drop | Black Stuart | WAD Problems | 31 | 5th February 2006 06:21 PM |