World-Designs-Forum  

Go Back   World-Designs-Forum > WAD > WAD Problems
Register FAQ Members List Calendar Gallery Today's Posts Mark Forums Read

WAD Problems For questions and answers re older World Audio Design Projects

Reply
 
Thread Tools Display Modes
  #1  
Old 5th February 2006, 08:32 PM
buddam buddam is offline
Senior Member
 
Join Date: Jan 2006
Location: London
Posts: 556
Default KEL84 tranny hum on L channel, plus click at switch off

Hi all

I've spent yonks tweaking, putting in new caps & res all over the place in PSU, Phono II and KEL84. Just when I thought I'd finished for now I note a hum on L channel and an increasingly loud click at switch off. I guess all the fiddling about inside and turning it upside down will not have helped.

What should I look for apart from the obvious? I should add that the trannies hum a littl emore than they used to when standing next to it, not just through the speaker.

Is there anything I could add as click suppressor?

Thanks

Adrian
Reply With Quote
  #2  
Old 5th February 2006, 10:32 PM
John Caswell John Caswell is offline
Super Moderator
 
Join Date: Dec 2005
Location: Wokingham, Berkshire
Posts: 1,780
Default Re: KEL84 tranny hum on L channel, plus click at switch off

Hi Adrian,
Did you put all the mods on at the same time? If so smack handies for you:-) yuo should know the rules by now only one mod at a time.
Does the amp hum alone without any input? If so you need to sort this first.
Please report back accordingly.

John aka Dr John
Reply With Quote
  #3  
Old 5th February 2006, 11:41 PM
buddam buddam is offline
Senior Member
 
Join Date: Jan 2006
Location: London
Posts: 556
Default Re: KEL84 tranny hum on L channel, plus click at switch off

Hello John

no, they weren't all done at once - the KEL84 was re-resistored first and then the PSU and then Phono II, with listening tests at each stage.

In answer to your Q - the KEL alone with no input now exhibits a buzzing more than a hum, or rather the buzzing that is now there drowns out the hum which is now more recessed. I've swapped spaeker cables and then valves L to R to determine that it is on the L channel.

Still a nasty click at switch off

Hope that's clear. Much appreciate your input.

Adrian
Reply With Quote
  #4  
Old 6th February 2006, 09:40 PM
John Caswell John Caswell is offline
Super Moderator
 
Join Date: Dec 2005
Location: Wokingham, Berkshire
Posts: 1,780
Default Re: KEL84 tranny hum on L channel, plus click at switch off

Hi Adrian,
Brain now in gear so....
Do you think your buzzing is mechanical or electronic, ie can you hear this through the speakers or only when standing near to the amp? When did you notice this? Are you sure it is on one channel only? What is different between channels? You will need to analyse what you have done to make this "problem" occur.
Feel free to call on the listed number 07836 722413

John
Reply With Quote
  #5  
Old 7th February 2006, 12:44 AM
buddam buddam is offline
Senior Member
 
Join Date: Jan 2006
Location: London
Posts: 556
Default Re: KEL84 tranny hum on L channel, plus click at switch off

Hi John, thanks so much, I'll phone tomorrow. Oddly, the hum has decreased. It is indeed on both channels, although louder on the L. I can only really hear it today with my ear close to the speaker (no more than 8ins).

Adrian
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Phono II looses right channel Greg. WAD Problems 35 7th December 2006 10:40 PM
Loud click at KEL84 switch off - solutions? buddam WAD Problems 5 19th July 2006 01:46 PM


All times are GMT +1. The time now is 04:19 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright World Designs