|
|
|||||||
| Register | FAQ | Members List | Calendar | Gallery | Today's Posts | Mark Forums Read | Search |
| Loudspeakers Your DIY Speaker designs |
 |
|
|
Thread Tools | Display Modes |
|
#1
12th July 2010, 09:42 PM
|
|||
|
|||
SEEKING help for SPENDOR SA1 Loudspeakers
Hello everyone,
I was given a pair of Spendor SA1 crossover and would like to find a suitable mid-bass drivers to substitute to what was in the original SA1 (I just have the crossovers, silly I know !) I beleive the SA1 were derived from the LS3/5A, other than that I have little to no information on these loudspeakers. They would be 15cm (or just about 6 inches) diameter in size with a translucid composite membrane. Has anyone ever ordered raw drivers from spendor ? Would they sell such products ? I have info suggesting the tweeter units are SEAS 22mm but I still need confirmation on these. Any help or input will be greatly appreciated. 
|
|
#2
12th July 2010, 10:06 PM
|
||||
|
||||
|
Re: SEEKING help for SPENDOR SA1 Loudspeakers
This review has some details of the mid/woofer driver.
http://www.stereophile.com/standloud...1_loudspeaker/
__________________
Philip. Everything in this post is my honest opinion based on what i thought I knew at that very moment in time. 
|
Linear Mode
